Qidi Q2/Qidi Plus 4 PTFE Guide Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dual function PTFE tube clip for the Qidi Q2 & Qidi Plus 4
- Ocena
- 4,9 / 5
- Polubienia
- 212
- Pobrania
- 1819
- Wydruki
- 17
- Wyświetlenia
- 6730
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple but functional dual purpose clip designed for the PTFE tube/push fitting on the Qidi Q2 toolhead. The clip acts both as a locking clip to prevent the PTFE tube from being removed and it also straightens the PTFE tube to prevent extreme bending along with straighten up it's pathway into the extruder. This will work with or without the front cover.
I printed mine out of PETG and haven't had any issues so far.
Printed at .08 layer height just for best quality and also used tree supports in the center as I found using any supports on the print were annoying to remove fully as this print is a snug fit. You can also print the model at an angle which will make it stronger and internal supports would not be needed.