USD Aeon Quad Rollerskates toy keyholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USD Aeon Quad Roller Skate toy key-holder with replaceable parts
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 389
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a toy key holder of a skatepark roller skate. Based on the USD Aeon inline skate boot but with roller skate parts instead of the inline skate frame and wheels. Done with replaceable parts in order to be easily customized by printing each parts separately with the different colors. This includes a version with a 45 degrees strap and a version without. The plates are also provided with and without toe stop.
Modeled from reference pictures and a real skate. It should be quite faithful to the real skate.
The model is provided as a lot of several parts: liner top, shell, plate, wheels … Mounting requires M3 inserts and screws (6-8mm long screws). The wheels are mounted by snapping it directly in the trucks axles and should roll freely.
Printed using 0.4 nozzle and at 0.2 layer height. Supports should be necessary only on the plate even if the slicer says otherwise for the boot. In that case, organic supports are recommended.