"Speak and Spell" Front Cover for Supercon.09 Communicator Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An answer to the call for mods for this years Hackaday Supercon.09 Badge. https://hackaday.com/2025/10/27/the-supercon-2
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This has NOT been tested as of publishing but is based off the design files here: https://github.com/Hack-a-Day/2025-Communicator_Badge/tree/main/hardware/mechanicals_and_models
I love the aesthetics of the original Speak and Spell and tried to capture that here. This is was designed with non AMS printers in mind. The color switches are done by layer.
V1 is thin. V2 has the handle beefed up to be more durable depending on the plastic you are printing with. For both I used PLA Pro and it was fine. V1 is flimsy though.