Customizable Skadis Board with slot increments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable IKEA SKÅDIS Board that reduces the material need by adding extra slots
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I could not find a model that doesn't take as much material to print as a plain board while also be able to utilize a larger bed size. So I used the existing oval features as cutouts, which also serve to give finer control over attachment placement. There are no screw holes, but there are plenty of models out there for mounting using the slots itself.
Customization
Provided are models which fit some of the more common bed sizes. Alternatively, customization can be done on Onshape at https://cad.onshape.com/documents/b9f3a4cc4d73674357848e72/w/a1b61302ef46f8cc59a07243/e/eea5dc09b545f1d49a8a7ec6. Change the rows and columns configuration, then export. Note that the rows and columns configuration refers to that of the original SKÅDIS layout, not the actual number of physical slots in each rows and columns.
Tileable Update
Added a set (last picture) that allows the boards to be tiled infinitely. Also included corner connectors with countersunk mounting holes. However, these are untested.