Water bottle holder for Toorx Compact treadmill

I designed this bottle holder for a Toorx City Compact treadmill, but it might be compatible with other stuff, and it's mostly intended to be used with regular bike and runner water bottles. Although these vary a bit in diameter, so test if it would fit your bottle I provided a test model (bottle_size_test_model) or you can just measure the diameter of the bottle which shouldn't be more than 76.5 mm, although this model starts wide and goes a bit smaller at the bottom (for a nice tight fit).

To quickly check if it will fit your mount object, I provided a screenshot of the sketch of the pipe it's intended to be mounted on. For this model, I recommend using PETG filament, since I have made a pretty similar model from PLA for a phone holder, and it passes all high-frequency vibrations, which doesn't feel nice.

The main part is split into 2 parts that are supposed to be glued together (bottle_holder and holder_screw). That's mainly to use a stronger print orientation (for a print orientation, you can check the screenshot from the slicer). For gluing, I recommend using DCM, it melts PETG and many other plastics, and when it dries up, plastic hardens back as it was before. So with it you can achieve a very strong bond, and these parts would become as monolithic as essentially one solid piece.