BTT Octopus mount for metal DIN rail clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for mounting the BIGTREETECH BTT Octopus printer control board onto metal DIN rail clips like these…
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 1505
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket for mounting the BIGTREETECH BTT Octopus printer control board onto metal DIN rail clips like these here: https://de.aliexpress.com/item/32971006389.html
The intended purpose of this is for mounting the Octopus board in the electronics compartment of a larger 3D printer like a RatRig V-Core-3 or something similar.
Print Settings
Printer:
Prusa i3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Filament:
eSun PETG, ABS, ASA Post-Printing
Required hardware:
You'll need some M3 screws, washers, and nuts to attach the bracket to the metal clip and to the back of the Octopus board. The outer holes have hexagons to insert M3 nuts at the back.
Category: 3D Printer Accessories