GK V3 frame acessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a few parts i drew for the GK V3 frame, an GepRc Pulsar clone. i like the frame, but i needed quite a few more features
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
All parts apart from the Batteryplate are TPU. a bit of bending is required to form some of the bends.
For the XT90 socket part and the USB C's in the battery plate 2 of the bridges in the CF top plate have to be removed. i used a dremel tool for this. please use PPE because of the carbon dust.
The GPS i used for this model is the HGLRC M100 Pro, not gigantic but powerful module, for me it was important that it doesnt cap at 32 sats, i got up to 46 at a good day.
The Capacitor holder is designed to slide over the single standoff to the back of the stack, so the cap legs are direclty in front of the ESC pads.
the O4 camera holder is this one: https://www.thingiverse.com/thing:6907812
i am currently working on an additional bottom battery plate, to use one or both spots as you may like.