1 / 2
Anycubic Kobra 3 3-way fan shroud modification
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to the original author for providing the STEP file I modified the shroud in attempt to balance air output.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 193
- Wydruki
- 0
- Wyświetlenia
- 612
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (31)Powiązane
Side air vents vary in size, along their length, in an attempt to equalize pressure. Middle air vent is now directing more air towards the hot end, which in my testing eliminated cooling issues I've noticed.
Normal supports seems to leave better surface finish compared to the tree support for this part when printing at 45deg angle.