Shield handle and hook for Hylian shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick & easy handle and hook to glue to the back of a Hylian shield
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Share Alike
This is sized to match a child's hand - and the Hylian shield printed at 80%. So you might need to scale it up if you use the 100% shield. I've attached the Fusion file, in case you want to modify it directly.
The bottom of the handle is curved to match the curvature of the shield backing (high density foam in my case). I've only glued it using E6000 which seems to be solid enough (make sure to let it cure long enough).
I've added a piece of leather to hold the forearm, but this is optional.
The hook is a simple way to hold the shield on the back. In my case, sliding it into the quiver which was already part of the costume was solid enough, but you might have to find your own solution.This is sized to match a child's hand - and the Hylian shield printed at 80%. So you might need to scale it up if you use the 100% shield. I've attached the Fusion file, in case you want to modify it directly.
The bottom of the handle is curved to match the curvature of the shield backing (high density foam in my case). I've only glued it using E6000 which seems to be solid enough (make sure to let it cure long enough).
I've added a piece of leather to hold the forearm, but this is optional.
The hook is a simple way to hold the shield on the back. In my case, sliding it into the quiver which was already part of the costume was solid enough, but you might have to find your own solution.
Printing
I've printed this in PETG with only 10% infill, no supports. PLA probably would be fine as well.