Necromunda Expanded Metal Walkways/Bridges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls,…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 493
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've never found any Necromunda bridges/walkways that I liked. I've tried to find something that has sides/walls, looks "good", isn't too chunky, & prints FDM as one piece w/ no supports. So I made my own.
These walkways (or bridges) are designed to look like industrial expanded metal suitable for use in the Underhive of Necromunda.
The set comes with "standard" & narrow walkways of lengths
- 300mm (can't print on 10" FDM printers)
- 285mm (can print on 10" FDM prints if angled 45 degrees)
- 210mm
- 120mm
There are also 4 "damaged" standard width 285mm walkways.
The platforms are derived from ShoobieWoobie's Modular Terrain Set (pipes and walkways): https://www.thingiverse.com/thing:3406031. The fences I made from scratch.
Category: Toys & Games