RC Truck/Car Body Pins Tether
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tether lines to hold body clips to the RC vehicle body in the event they fall out.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
I grew tired of losing body clips after a roll over and I knew these tethers already existed, but I didn't know where to buy them. Therefore, I made my own using TPU filament. Simply make a small hole in the body of the RC that you want to use the tether on and just pop the tether in that hole. Be sure to make the hole a couple sizes smaller than the nub that goes through the body to ensure a tight fit and so it doesn't pull out of the body. I've made several sets for my RC's that don't already have them and they work great. Enjoy the model.