1 / 3
Heavy Duty Corners/Hinges for Prusa i3 MK3 Enclosure (IKEA LACK) — zdjęcie 1
1 / 3

Heavy Duty Corners/Hinges for Prusa i3 MK3 Enclosure (IKEA LACK)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stronger hinges & corners for the Prusa Lack Enclosure

Ocena
5 / 5
Polubienia
6
Pobrania
30
Wydruki
2
Wyświetlenia
185
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I had some issues with the Original Prusa Lack Enclosure:

  1. Some features are quite thin, they break easily.
  2. The screw hole does not constrain the corners rotationally
  3. Depending on the size of the horizontal screws, their paths conflict
  4. Wood screws tend to need a 45 degree chamfer to prevent splitting parts

This model:

  1. Increases thickness of several features
  2. Has identical top & bottom corners, so there is no difference between “top” and "bottom"
  3. The corners are constrained by using multiple screws
  4. The screw holes are chamfered, for typical wood screws. Use 4x40mm wood screws for example.
  5. Screws the tables together permanently, for more stability and strength. This might be a drawback for you!

I advise (eventually) printing these parts in ABS/ASA with “Voron specs” (40% infil, 5 bottom/top layers, 4 perimeters), for even better strength & temperature resistance.

If you want to slice it yourself, the 2 STEP files are for a single corner and a single hinge. For one enclosure, you need 4 corners, 2 hinges, and 2 mirrored hinges, for 8 parts total. You can easily mirror parts in Prusa Slicer:



The “Cable Corner” STEP file can be used to print one or more of the corners with a channel for a power cable.

Note that there's pre-sliced GCODE for default PLA and PETG, and one for “Voron Spec” ASA. Regardless of which set you choose, you will need to print each plate twice to get all 8 corners.

For parts like cable clips, spool holder, door handle, etc please refer to the original post from Prusa.

Tagi