TI-84 Plus CE Calculator Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stands your calculator upright, so you can see your screen-display without constantly bowing your head down.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 171
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Stand designed specifically for the Texas Instruments TI-84 Plus CE, but does support the TI-30XIIS (with a bit of wobble). It stands your calculator up 60 degrees, and provides enough clearance for the buttons, when the backplate is attached. The weight of the calculator shouldn't impede any problems, since there is more than enough material inside the base.
Recommended that you splice the stand on its side, but your welcome to put in standing normally, and give a fillet along the edges. I used FlashForge PLA-Pro White, with a Standard 0.4" Nozzle. Also does work as a phone stand, since it does allow full access to the phone touchpad.