1 / 4
POGs and Slammers - Set 4 of 7  (MMU) — zdjęcie 1
1 / 4

POGs and Slammers - Set 4 of 7 (MMU)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,36 € – 0,44 € netto (bez VAT)

Dla pliku: POG 41 Cat 1_0.1mm_PLA_MK3SMMU2S_30m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,40 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
30 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

POGs and Slammers like those made famous in the 90’s. Also includes a canister for storage and trays for display.

Ocena
0 / 5
Polubienia
19
Pobrania
91
Wydruki
0
Wyświetlenia
467
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wanted to make a set of POGs and Slammers similar to those made famous in the kid’s game of the 90’s.  The history and gameplay can be found here:   https://en.wikipedia.org/wiki/Milk_caps_(game).

I used the dimensions found here:   https://georgestephanis.wordpress.com/2017/08/01/the-dimensions-of-pogs/.  A thickness of 1.3 mm for POGs didn’t allow for a lot of room to play with a 0.4 mm nozzle.  And I wanted smooth surfaces on the tops and bottoms (you know, like POGs) so no indentations or protrusions.  With that in mind, I didn’t use the normal practice of layering and filament changes to get multiple colors with a single extrusion head.  Also, the design couldn’t go all the way through in order to differentiate the sides in the game. So, it all sounds perfect for the MMU.

POG thickness is 1.3 mm (Slammers are 6 mm thick and slightly wider) with the design itself being 0.6 mm using 2-5 colors.  If the design were any thicker, it showed through the back too much with some colors.  Any thinner and the design could be less vibrant.  To get smoother designs when printed, I flip to print the design first on the bed.  Print with a starting layer of 0.2 mm and then 0.1 mm layers after that for a total of 12 layers.  Slammers were printed the same way with just more layers.  I used 100% infill on POGs and Slammers which helps the Slammer weight to match the dimensions linked above.

There are 66 POG designs split up into 6 “Prints” of 11 POGs each to spread the files out and hopefully make it easier to find designs.  There is a different Slammer design in each “Print” for a total of 6 Slammers.  There is a separate “Print” with a canister to hold POGs and Slammers and display trays that hold 1 or 5 POGs.

The attached text file lists the POG and Slammer designs in the various “Prints”. 14 of the 72 designs are remixed (some not from Prusa Printers) with credit shown in the list.  The rest are mostly free clipart available online or something I created.


 

Tagi