DJI O4Lite canopy for Penguin AtomRC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Canopy designed for Penguin AtomRC model, and use of DJI O4lite with improved air cooling and suitable for 21700 LiIon.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adaptation of existing design to get lighter installation, possibility to use 21700LiIon pack, and good air cooling flow and protection for DJIO4Lite module.
3 Rear ducts on rear panels improved a lot the cooling by creating succion to extract hot air from DJIO4Lite compartment. Maybe the 4 small air inlets on both side of front panel are no longer usefull, and only front air inlet behing the camera could be sufficient.
DJIO4 VTX module is assembled with rubber damper on canopy base, to protect module from vibration.
Printed with PLA+ Esun.
Use of metal insert to fit with the fixation screws of the hook, front panel and rear panel.