SHARK
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SHARK what else to say its a cool shark prints in 2 pieces and glued together. Easy to scale and no supports needed.…
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 1048
- Wydruki
- 2
- Wyświetlenia
- 5321
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution
SHARK what else to say its a cool shark
prints in 2 pieces and glued together. Easy to scale and no supports needed.
(Shark in Picture scaled to 130% with Cura)
I did not design the Shark I only cleaned it up and cut in half for easy printing.
Make sure the flat part is touching the Print bed, the tail imported to Cura appears to be flat but tilts in a slight angle.
In cura select the part, click on rotate and select "face to build plate" click on flat part of the shark and voilà!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28 (4 outer layers)
Infill:
25% quarter cubic
Filament: Overture PLA Plus Black
Notes:
Prints best with a Brim, 25% infill and 4 Layers keeps the Shark afloat, more infill might be better to keep the shark floating in a lower position.
Category: Animals