Puppethouse Fence (modular & magnetic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little simple fence for your puppets home
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 146
- Wydruki
- 3
- Wyświetlenia
- 951
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The parts can be printed with standart settings as oriented. No supports needed.
I used these magnets (any 6x3 mm will do):
As seen in the fotos I always switched between fence and post/gate for building the fence for the puppet house of my daughters.
When starting to glue in the magnets I started with one magnet glued in a post-part. Then just put another magnet on the first one and used the post as a magnet holder for all the magnets that are glued into the fence parts. Then used a fence part to hold all magnets for the posts/gate and wallmount. That way you will always have the correct orientation of the magnets without marking them by hand.
Depending on your planned layout you can choose different posts and fences.
Please share your makes and give me feedback on the models.
Happy printing!