Printarack - Mini Rack System (10")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10" Mini Rack, printable on an A1-Mini.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There's a lot of great mini-rack designs out there, but none of them felt quite right to me. I wanted something that I could print on my A1-Mini, and that would be minimal and easy to extend.
There's only a few pieces here, but they work in a variety of orientations to form a simple 10" Rack.
Print:
- 4x of the appropriate Frame beams
- 8x the base (4 for the bottom, 4 for the top
- Enough blanking plates to give structure.
Arbitrarily big frames can be made by joining the frame pieces with the Joiner piece and a Dowel.
Everything uses M6 Bolts and hex nuts, you might need several lengths. These are cheap on Aliexpress.
Assembly should be self explanatory, you just slot it all together and bolt.
(The blanking plates take m3 bolts, or use other regular blanking plates, ie. this one)
Uses Dimensions for standard 10" Mini-rack
Pictured with:
Alternatives if you don't like this one: