Holder air quality meter for honeycomb storage wall
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a air quality meter
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to place my air quality meter inside my enclosure without obstructing anything and this is the result.Remixed the attachments for the Honeycomb storage wall and my holder uses the double one for extra strenght.
Printed in PLA, but if you have a heated enclosure use PETG, ABS, ASA, etc etc.
Keep in mind to look for the Honeycombs that are with the pointed side up (angle of the attachment), If u use the flat ones this won't work.
If you want to scale, u guess it's possible in the width of the meter but not the depth because the Honeycomb attachment will not fit anymore.I wanted to place my air quality meter inside my enclosure without obstructing anything and this is the result.Remixed the attachments for the Honeycomb storage wall and my holder uses the double one for extra strenght.
Printed in PLA, but if you have a heated enclosure use PETG, ABS, ASA, etc etc.
Keep in mind to look for the Honeycombs that are with the pointed side up (angle of the attachment), If u use the flat ones this won't work.
If you want to scale, u guess it's possible in the width of the meter but not the depth because the Honeycomb attachment will not fit anymore.