Jaison Leogang Bumper (Lackschutz)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small bumper added to the rear through axle to protect the paint job of a 20" Jaison Leogang kids mountainbike
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This small bumper can be attached to the rear through axle to protect the paint job of a 20" Jaison Leogang kids mountainbike. When the bike is laid down, the bike will lay on the pedals and this bumper and not on the paint job.
Will also fit other kids bike as long as they have an axle mounted with a 6mm hex socket.
Depending on the material used for printing, I added a loose fit, e.g. if you choose materials with CF or GF. Otherwise, I'd go with the tight fit.
Ideally printed in a hard TPU for maximal toughness.