Skådis Chiral Holders for Knipex 86-XX-180 and 87-XX-250 Pliers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for Skådis boards, 2 chiral -- "mirrored" -- versions.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of vnb's version of the holder. I simply mirrored the whole part to make a chiral version. For whatever reason, I did not like having the pliers “pointing to the right”. I also took vnb's original file and “split [it] into objects”, to separate the 3 – now 6 – additional components.
Other than that, it's has stated in the original version: the springs are option but I recommend them, as they keep the holder from rotating; insert the T-Clip (from Line Arc Line's original creation) into the holder and through the Skådis board, and rotate it (it only turns one way, mind you, don't force it). The included pins are sized for painted boards, if your boards are bare wood, read this.
These holders can hold either Knipex 86-XX-180 parallel-jaw pliers (86 01 180, 86 02 180, 86 03 180, or 86 05 180 variants), but only its jaws closed, or Knipex 87-XX-250 water pump pliers (87 01 250, 87 02 250, 87 03 250, or 87 05 250 variants). While I haven't tested the Cobra, it works excellently with the 86-XX-180 (the central reference indicates the materials the handle is made of, and in this case, is of no consequence).
TO REITERATE, THESE HOLDERS ONLY WORK FOR THE RESPECTIVE 180MM- AND 250MM-LONG PLIERS.
My parts were printed with semi-wet FormFutura ePETG and a 0,4mm nozzle, at a layer height of 0,2mm; I used supports, but your mileage may vary there. I kept each version in a different plate, so print the one you prefer; if you're undecided, print the 3rd plate, which has both versions, and work it out with it in-hand. Don't forget to “Import Geometry Only” when opening the file.