1 / 6
Creality Ender 3 V3 KE & SE - Stiffener Arms Ender-3 V3 Plus style
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality Ender 3 V3 KE & SE - Stiffener Arms
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 75
- Wydruki
- 1
- Wyświetlenia
- 1233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (27)Powiązane
Creality Ender 3 V3 KE & SE - Stiffener Arms
The posts are made of a 10x10x380 mm square tube purchased from a hardware store and shrink-wrapped with a 12.7 mm shrink wrap. The shrink wrap should be cut slightly longer, at 385 mm, as it will shrink slightly in length after heat treatment.
you will also need:
аnd most importantly mounting blocks:
required for installation: