Lumadent AirLUX Battery Charging Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic Caddy for recharging batteries for AirLUX light on Dental Loupes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this to help my wife declutter her desk at work, so hopefully it helps you too!
Required Materials:
- Lumadent AirLUX rechargeable Batteries
- Magnetic charging cord set with adapters ( I used this cord from “Ankndo” on amazon. Unfortunately they ended up all being different lengths, so I would recommend 2x this one instead)
- 20x10x5mm neodymium magnets (6 total)
- A 4x USB to wall power adapter.
- hot glue gun
- craft knife
Print the file in the default orientation, there should not be significant issues with the overhangs. I print with 4 walls, 3 bottom layers and 5 top layers for general strength. Material shouldn't matter, although I used PETG.
The magnets and cables should all be glued in place after you have situated them correctly. The adapters will need to be hot glued to the batteries as well, or the cords tend to pull them out (the magnets are rather strong). I carefully trimmed the glue from around the battery to be as unobtrusive as possible with a craft knife. I have been told the adapters do not add significant weight to the batteries.