Motion Pro Tire Pressure Gauge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Conveniently holds a tire gauge by Motion Pro (newer model - see the photos).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to be mounted onto an upright of a wire rack with three zip ties. Can be mounted to any vertical tube of a diameter of up to 25.6mm.
The gauge simply slides into the holder from above with the hose & chuck hanging down freely.
There are two models with 13mm and 17mm clearance between the gauge aluminum handle and the tube onto which the holder is mounted. I.e. 17mm one keeps the head of the gauge 4mm farther from the tube.
Printed in PETG upside down, with 3 vertical perimeters and 25% infill. Probably can be printed with default 2 perimeters and 25% infill.