1 / 3
Display Wall-Mount Holder for my Educational Models — zdjęcie 1
1 / 3

Display Wall-Mount Holder for my Educational Models

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Collect the models and fill your wall with them!

Ocena
0 / 5
Polubienia
23
Pobrania
71
Wydruki
1
Wyświetlenia
291
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution

As suggested by @samol_1018713 in this comment, here, I publish display wall-mount holder for my educational models.

With this holder, collect the models and fill your wall with them!

 

It can be fixed on your wall by push pins or small nails.
If you use low-profile push pins, you can store a description card in the back-side pocket together with the model.


 

You can pull the model forward (toward you) to remove it, so, even if the holders are placed close together vertically, they won’t interfere with each other.

 

Design File

To enable your customization, I share its STEP file.

 

Printing

  • Any filament
  • I used 0.28mm layer height draft mode

 

My Educational Mechanical Examples Series

This model is for my educational mechanical mechanism examples on 80mm x 80mm base plates.
You can find all models in the series in this collection => [Mechanical Mechanism Examples]

 

Happy printing!

Tagi