Clip-on Cover for ExcelMark Stamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep the ink inside.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
My wife wants to carry a self-inking stamp in her purse, but she doesn't want ink all over her stuff. So I designed this clip-on cover. It clips on securely, covers the inky bits, keeps the stamp from firing accidentally, and slips off easily for use.
To remove the cover, pull it down by the two clips on the sides. Pulling from the ends just makes it grip harder.
ExcelMark makes several sizes of self-inking stamps. This cover fits the A-1848 model.
I modeled this in Fusion 360. I've included the CAD files in .f3d and .STEP formats for your remixing pleasure.
Printing
I suggest PETG, ASA or ABS. PLA is probably too brittle. The model is optimized for 0.2mm layer height. Two perimeters and 15% grid infill are fine. There are internal stiffening channels in the base to make it more rigid.