Windshield wiper holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These holders keep the rubber of the wiper blades free from the car window, preventing it from freezing on the screen.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 345
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These holders keep the rubber of the wiper blades free from the car window, preventing it from freezing on the screen. Furthermore, the rubbers hang freely in the holder, preventing them from being crushed. You need two pieces per wiper, place them in such a way that the whole wiper blades are free from the car window.
Note that the "Seam position" is not aligned. In the first example, the seam was printed into the recess as a line, which impacted its strength of the holder negatively.
Due to the design, multiple holders can be nested together.
Note that the "Seam position" is not aligned. In the first example, the seam was printed into the recess as a line, which negatively impacted its strength of the holder.
Take my advice: use a bright color, so you won't forget removing them before you start driving ;-).
Material: PETG
Layer height: 0.25 mm
Seam postion: random
Filement: 1.1 gram per holder