Pod Lamp - Asymmetric Ribbed Uplighter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I couldn't find an uplighter I liked to I decided to make one. This bulb location is adjustable to user preference.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
This floor seated uplighter is designed to give a soft ambient glow. The bulb can be slid forwards on a track and also be tilted to allow spot lighting or a softer ambient light.
The electrical connections are made with WAGO 222-412 which clip into the lower portion of the bulb mount. This model is designed to be used with a GU10 bulb.
I used some aluminium standoffs on mine but these could be much shorter if a more diffuse glow is requited. I used a nice braded cable I had on hand, the track in the base allows the cable to exit at multiple points. The filament I used in the pictures was SUNLU Marble PLA
This isn't very efficient on filament using 760g when I printed it with pretty much solid walls.
Bulb Holder - https://www.amazon.co.uk/dp/B0F22181ZP
Standoff - https://www.amazon.co.uk/dp/B0FC2DX3NL
The Bulb holder uses M3 cap head bolts, the pivot happens on an M8 cap head. The bulb holder is bolted to the base using an M4 CSK, I ran a tap down the hole first but you could probably use a woodscrew here.
Happy Printing