1 / 1
8x10 Mobius Photo Picture Frame For Big Printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made this for larger prints and added a few holes to hook into a small nail or photo hanger. Should fit an 8 by 10"…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 430
- Wydruki
- 0
- Wyświetlenia
- 2046
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (58)Powiązane
Made this for larger prints and added a few holes to hook into a small nail or photo hanger. Should fit an 8 by 10" photo perfectly if your printer prints to size accurately. You can measure after the first layer goes down if you're unsure.
Only will fit on a 300mm wide bed as-is, though you can certainly scale it in your slicer for less.
Print Settings
Printer:
Voron 1.8 300
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20 cubic subdivision
Filament:
PolyMaker ABS
Category: 2D Art