Wyrmspan and Dragon Academy Expansion Insert/Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This insert fits the original Wyrmspan game and Dragon Academy expansion without any lid lift. Vertical Storage Safe.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 143
- Wydruki
- 2
- Wyświetlenia
- 980
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I was using a model created by someone else until the release of the expansion. The additional cards and board make it significantly more difficult to get the box to fit together just right. I couldn't find anything that was exactly what I wanted so I created my own.
All of the instructions and books are stored at the bottom since I rarely have to reference them anymore. I created spacers to help keep those aligned, but they aren't really needed.
I do not believe these can be used with sleeved cards.
You will need to print out 5 of the meeple storage. These meeple fit in the large card (dragon card) base using a dragon card on the bottom to cover the hole.
These trays were printed on a Bambu Lab A1 with a 0.4mm nozzle, 0.2mm layer height, and 15% infill. No supports were used.
