Triangular tripod leg feet - Universal - Parametric FreeCAD 1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet or covers for a tripod made of triangular shaped legs. The legs should look like a trapezoid with one rounde side.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are replacement feet for a tripod with triangular looking legs. If they look like the picture bellow, you can modify the FreeCAD file VERY easily by just entering in some values into the spreadsheet.
The profile of the leg should look like a half a hexagon with the long side being rounded. There are only 7 values that you need to fill in. the B column is the only one that should be changed, the yellow one is auto calculated and used in the model.
You can copy all the values and paste them into the lower half of the spreadsheet to store your boots. If you need to re-print them, you can copy them back into the active section and it will re-make that part instantly.
I tried my best to make the FreeCAD self explanatory and labeled everything. I also included the original 2D scan so you can see how the profile was sketched if you are interested.
NOTE: This requires FreeCAD 1.1 or newer. As of this writing, the current stable version is 1.02, so you will have to download the latest Weekly build from here: https://github.com/FreeCAD/FreeCAD/releases.
The photos show the part printed in NinjaFlex A85 TPU, but any material rigid or soft can be used. If you mess around with the FOOT_LENGTH_EXTENSION angle you can make a pointy version.