Dept 56 Just Plug LED light conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Department 56 village conversion to Just Plug LED lights
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted to use smaller LED lights instead of the LED bulbs in dept 56 sockets. To hide wires i had to take shelves apart and its not fun. These bulb holders have a removable dovetailed plate to stick the LED to so it can be easily routed without having to disassemble the plug side or other connectors. The warm white LED lights look great with the christmas village and are about as bright as the full bulb. They are also dimmable.
The light holder prints flat and you use a heat gun to form it. I usually bend it 90 degrees right at the edge where the thickness changes and then bend it back out with heat to provide the right tension.
90 degree adapter added. Some lights enter from the bottom and some from the side. LED lights pointing straight up appear to light well and reduce the glare when viewed from the front