Mason Jar Flip Top Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flip top lid for Mason jars
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is for a flip top lid for glass Mason jars. I have included files for regular mouth Mason jars, wide mouth Mason jars and a version for wide mouth Mason jars with a utensil slot in the top.
Printing: Use food safe filament. I printed this design using food safe PLA filament and the default 0.20mm Standard settings and 100% Sparse infill density.
Print the lid with the top side on the build plate for best results. When the print is complete, you should be able to easily snap the edge of the flip top lid away from the rim so that the top hinges open.
Supports are not necessary for the Jar Flip Top - Regular Mouth and Jar Flip Top - Wide Mouth - Solid files. The slicing software may generate messages about overhanging cantilevers because of the separation between the flip top and the rim but these can be ignored.
Supports are necessary for the Jar Flip Top - Wide Mouth - Slotted file to support the area above the utensil slot. Limiting the support to On build plate only will work for this.