Core one XY area test (umbilical getting stuck?)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See "Chopstick Mod" on Prusa Forum. Test print to exercise the advertised Core One print area. READ INSTRUCTIONS!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Test print to confirm that the whole print area is usable without the umbilical getting stuck between printhead and X motor.
Note: Size is the nominal advertised area but you need to scale this model very slightly down to allow for tool movement (which may depend on slicer settings and version etc). E.g. one millimeter less in X and Y should work. Scale Z for the desired number of repetitions (hint, use large Z scaling then abort the print).
When testing, also exercise fast “travel” moves (the umbilical has inertia and will swing around). This doesn't require any test pattern - instead, grab any object of choice (or generate a 1 mm^3 box in the slicer), duplicate to every corner of the printbed.
See here for chopstick mod:
https://forum.prusa3d.com/forum/user-mods/core-one-chopstick-mod-umbilical-x-motor-jamming/#post-768645