1 / 3
Fracino cherub stubby 3 way valve exhaust nozzle — zdjęcie 1
1 / 3

Fracino cherub stubby 3 way valve exhaust nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement exhaust spout for early model fracino cherub espresso machines

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

The original nozzle from the 3 way valve on early model (round tray) Fracino Cherub espresso machines is too long and interferes with removing the drip tray. I remade it as short as possible which now allows the drip tray to be slid out level without spilling water everywhere. Later models of these machines use an entirely different drip tray so the problem was fixed. 

I printed in PETG, but any filament with decent temperature resistance should be fine. 

Print with small layer height eg .1mm

Fusion 360 file included

Tagi