Led strip holder for Voron Trident 250 (LDO kit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single piece led strip holder for the Voron Trident 250 to be mounted on the frame with 2 M3 t-nuts and 2 M3x8 screws.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The suggested led strip holders did not fitted very well in the extrusions so I designed my own. Instead of individual sections, this one is a single piece that gets mounted to the extrusion with 2 M3 t-nuts and 2 M3x8 screws. It is easier to slide in the led strip if you don't remove the adhesive cover (or tape it over again) the design holds the ledstrip without the adhesive. The spacing and length is based on the led strips that were included with the LDO kit. You will need one per led strip and I printed them in ABS.