1 / 3
Drift Wheels Tires 17mm Hex for 1/8 Monster Trucks / Truggies Savage revo summit ... — zdjęcie 1
1 / 3

Drift Wheels Tires 17mm Hex for 1/8 Monster Trucks / Truggies Savage revo summit ...

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I created some drift wheels to have a lot of drift fun with my Monster Truck

Ocena
0 / 5
Polubienia
5
Pobrania
17
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I created some drift wheels to have a lot of drift fun with my Monster TruckI created some drift wheels to have a lot of drift fun with my Monster Truck

for a long term use i made the tires changeable. these are hold by beadlocks mit 3mm screws.

I printed these with a 0.6mm Nozzle (time saver)

the center part of the rim, where the 17mm hex is located was printed with 100% infill, so you could use max force to tighten the wheels properly. 

3 outerwalls and 30%infill for the rest.

Supports are needed for the Rim and the Tire (automatic placement in Prusaslicer worked fine for me)

 

Tagi