KraBox - stackable boxes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of stackable trays and small inner bins that can be customized to any size. You will need basic…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 626
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a set of stackable trays and small inner bins that can be customized to any size.
You will need basic knowledge of OpenSCAD to get the size you want.
The tray size is 150x150x37mm
Inner space can be empty, separarated to smaller sections on organized with smaller bins that
Tray with separators
To make a tray with fixed separators use combination of a tray and one or more tray_separators eg:
tray(); tray_separators([1/3, 2/3], [1/3]); translate([0, 1/3* tray_Size[0], 0]) tray_separators([], [1/3], [1/3* tray_Size[0], tray_Size[1]]); Inner Bins
Print an empty tray first and then use bin with optinal split:
bin([bin_M, bin_S]); bin_split([bin_M, bin_S], [3, 1]);
Predefined bin sizes (~):
- XS - 25 mm
- S - 50 mm
- SM - 75 mm
- M - 100 mm
- L - 150 mm
Print Settings
Printer:
Sovol SV01
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Notes:
I recommend brim (~3mm) to avoid wrapping of a tray
Category: DIY