2008 Subaru Outback Key FOB Button Fix Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spacer for the internal button to switch interface, to reduce play and improve reliability.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My key fob buttons have always performed poorly. I finally determined that this is partially because the buttons do not actuate the switches reliably. There are two causes for this that I found: (1) the dust/water membrane is split where it contacts the switch head, just from decades of use; (2) there is simply too much of a gap between the button underside and the switch head, resulting in inconsistent actuation
I'm not sure how much of an improvement this is as I've only tested it for 5 minutes so far, but it does already seem better.