1 / 5
Original Prusa MK4 Enclosure - Spool Holder Arm 1kg (75cm) and 2kg (125cm)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spoolarm for Original Prusa MK4 Enclosure for 1kg and 2kg Prusament spools
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 277
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (12)Powiązane
I liked to use the spool holder inside the enclosure. I used an length extender for quite some time but it was a bit too big for the 2kg spools.
I found some interesting spool holders like this and ended with extending the version of leighton.works.
- Printed in Prusament PETG
- 0.2mm layer height
- 0.4mm nozzle
- 25% infill
- auto supports for printing horizontal for better strength.