1 / 3
PIP Articulated Iron-Spike Dragon — zdjęcie 1
1 / 3

PIP Articulated Iron-Spike Dragon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Very flexible dragon that prints without supports!

Ocena
5 / 5
Polubienia
48
Pobrania
432
Wydruki
3
Wyświetlenia
1095
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I've always been a fan of these dragons and wanted to give it a go myself. So here we have an Iron-spike Dragon!

It prints in place with no supports, your slicer might recommend a brim, but the fingers might be a bit hard to clean up if you do. The pictures are from an old version with 3 arm segments, but they were a bit too unruly and I reduced it for ease of printing and a bit of a better final product. 

The spines may string a bit if your settings aren't dialed in, but I managed to print without issues on my Ender 3 v2

Print settings: You should be able to print without issues in PLA with 2 walls, 15% infill, and no supports or brim.

Tagi