1 / 3
Comfort Thumbstick Cap for FrSky Transmitters
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Domed comfort stick cap for FrSky x18/x20 transmitters. Includes stick protectors to fit the larger profile caps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stick cap will fit any m4 threaded control stick. Tolerance is tight, I recommend running an m4 bolt through it to cut the threads before installing on your transmitter to reduce extra torque on the controls.
This required a new set of stick protectors, as the old ones will not fit the larger caps. So I modeled new ones.
I printed variable layer height in black Hatchbox ABS on a Bambu P1S. I've also tested in PLA and PETG with no issues.