Santa Claus on a sleigh with reindeer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Santa Claus on a sleigh with reindeer
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 652
- Wydruki
- 2
- Wyświetlenia
- 1577
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Santa Claus on a sleigh with reindeer
Print:
Nozzle 0.40 mm
Layer height 0.2 mm
Infill: 10 %
Support: I selected organically and placed it everywhere.
Maximum print speed set to 100 mm/s.
I used regular PLA.
I left the reins on the sled so that I could attach a wool thread to them and thus create a connection to the reindeer.
Weihnachtsmann auf Schlitten mit Rentier
Druck:
Düse 0,40 mm
Schichthöhe 0,2 mm
Infill: 10 %
Support: Ich habe organisch ausgewählt und auf überall gestellt.
Maximale Druckgeschwindigkeit auf 100 mm/s eingestellt.
Ich habe normales PLA verwendet.
Ich ließ die Zügel am Schlitten, damit ich einen Wollfaden daran befestigen und so eine Verbindung zu den Rentieren herstellen konnte.