1 / 1
Washer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple washer with diameter 1cm, hole of 4mm and 2mm height. Made a bunch to increase the tension on the…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 662
- Wydruki
- 2
- Wyświetlenia
- 1538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (17)Powiązane
Just a simple washer with diameter 1cm, hole of 4mm and 2mm height.
Made a bunch to increase the tension on the springs under my heated bed, because 2 out of 4 were too loose.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.3
Infill:
100%
Category: Parts