Xbox Ally X / Xbox Ally stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand for my Xbox Ally X to replace the cardboard one included in the box.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 315
- Wydruki
- 2
- Wyświetlenia
- 883
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a stand for my Xbox Ally X for when it's not in a case (or in my hands), but the cardboard one that ASUS includes in the box isn't going to stand the test of time.
The stand holds the console steady without the risk of tipping back and could be used while the console is plugged into an external hub/screen/controller.
The stand can be used for either the Xbox Ally (validated by @Relyt72_4128263) or the Xbox Ally X.
There are 2 files - one with the Xbox logo on the front, and the second without any logo.
I printed in PLA at 0.20mm layers + organic supports, but the model should print OK without any supports (a little bridging at the front on each side).
Xbox logo created from the SVG on Wikimedia Commons and is a trademark of Microsoft.