1 / 4
Biqu H2 V2S Revo mount with Eddy duo and ADXL345 — zdjęcie 1
1 / 4

Biqu H2 V2S Revo mount with Eddy duo and ADXL345

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an X-axis mounting plate for Biqu H2 V2S Revo with a MGN12H mount, an Eddy duo probe and ADXL345

Ocena
0 / 5
Polubienia
1
Pobrania
28
Wydruki
0
Wyświetlenia
302
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is an X-axis mounting plate for Biqu H2 V2S Revo with a MGN12H mount, an Eddy duo probe and ADXL345 for input shaping. There is also a chain connector to be used with this type of chain: https://www.printables.com/model/310284-ender-3-s1-cable-chain

This chain connector allows some vertical flex to avoid jamming with the nut holding the X-axis stepper.

I have used this for my modified Ender 3 pro (dual Z-axis and all linear rails) but this can be used on any printer with a guide rail X-axis

The X, Y and Z offsets are:

X: 0 mm

Y: 37.91 mm

Z: 1.45 mm

Printed using PETG and 0.4mm nozzle at 0.2 mm layer height, 15% infill.

The FreeCAD design file is also included in case you wish to customize it.

Tagi