Intel x550-t2 Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan Shroud for an Intel x550-t2 network card.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 461
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this fan shroud to cool the commonly available Intel x550-t2 NIC cards that can be found on the second hand market. Needed it to remain 1-slot in width. The fan model that I used is YY7015M12B. This fan is taller than a half height card so not good for a 2U chassis. Here's the measurement diagram for the fan provided by the vendor I sourced from.
The model is designed to use two M3 heat set inserts to secure the shroud to the card. I unfortunately undersized the screw hole mounting, which warps the model out slightly, but doesn't affect functionality. I've left it as is as it works for me but feel free to make modifications for work better for you.
I've included the f3d project if you want to modify the design for use with other fans, or fix my poorly done heat set insert holes.