Flame Golem Giant – Warden of the Molten Deep | 32mm & 75mm Fantasy Miniature | FDM & Resin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to create a Giant Fire Golem Boss for an upcoming campaign.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Flame Golem Giant – Warden of the Molten Deep
Forged in the heart of a dying volcano and bound by ancient runes, the Flame Golem Giant towers over the battlefield with stone-cracked skin and a soul ablaze. His trench coat flaps like scorched banners, and every step sends tremors through the earth. Whether summoned as a guardian, boss encounter, or lore-bound relic, this model brings mythic weight to your tabletop or display shelf.
Designed for RPG campaigns, dioramas, or paint-focused showcases, this model features:
🪨 Cracked stone texture with molten vein detailing
🔥 Sculpted flame base curling around his feet
🧥 Tattered trench coat and rugged stance for dramatic silhouette
🧱 Resin-print optimized with bold contours and minimal supports
🎨 Ideal for painters who love texture contrast and elemental themes
Character Created in assistance with Tripo3D.
🪨🔥 Stat Block: Flame Golem Giant – Warden of the Molten Deep
Attribute | Value |
|---|---|
Class | Earthflame Juggernaut (Tank/Elemental Hybrid) |
Race | Golem – Flamebound Variant |
Level | 10 |
Alignment | True Neutral |
HP | 148 |
AC | 18 (Stonehide + Flame Aura) |
Speed | 25 ft. |
Primary Weapon | Seismic Fists – Unarmed strikes deal bludgeoning + fire damage |
Abilities |
|
• Magma Pulse – AoE stomp: 20 ft. radius, 4d6 fire + knockback |
|
• Stoneform – Can petrify for 1 round to gain immunity to damage |
|
• Flamebound Core – Explodes on death: 6d6 fire damage within 30 ft. |
|
• Molten Grasp – Grappled enemies take 2d6 fire per turn |
|
| Skills | Intimidation +6, Athletics +8, Arcana +3 | | Saving Throws| Strength +7, Constitution +8 |
Perfect for resin or FDM printing, this model offers crisp, painter‑friendly detail and a dramatic silhouette—ideal for tabletop RPGs, fantasy dioramas, or collector displays that celebrate stealth, intrigue, and deadly elegance.
⚙ Print Specs
Supports: Standard tree auto supports
Category: Characters & Monsters
Recommended Layer Height: 0.05–0.1 mm (resin) / 0.12–0.16 mm (FDM)
Material: Resin or PLA+ for best detail retention
Scale: Heroic 1:10 (adjustable for tabletop use)
Orientation: Crouched pose with daggers supported
🧱 FDM Printing
Use Tree Supports (Default) for optimal overhang coverage.
Enable Outer Brim to ensure strong plate adhesion and prevent edge lift.
Recommended materials: PLA+ or PETG for best surface finish.
Suggested layer height: 0.12–0.16 mm for miniatures and display pieces.
Tune flow and retraction for fine detail; slower outer walls yield smoother armor and faces.
🧪 Resin Printing
Use the following settings for reliable, high‑detail results:
Printer: Elegoo Saturn 4 Ultra 16K
Exposure Settings:
Layer Height: 0.05 mm
Bottom Layers: 5
Exposure Time: 2.75 s
Bottom Exposure Time: 37 s
Transition Layers: 10 (Linear)
Rest Times: Before Release – 2 s, After Release – 2 s, After Retract – 4 s
Advanced Settings:
Anti‑Aliasing: Level 8
Print Time Compensation: Enabled (0.93 s)
Light PWM: 255
Bottom Light PWM: 255
Supports & Orientation:
Use Auto Orientation and Auto Supports (Light) in ChituBox.
Ensure proper drainage and avoid flat surfaces directly on the build plate.