Centauri Carbon Usb strain relief remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added mounting hole to mount to cable chain screw hole for those not using the cable chain anymore. modded ptfe end also
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 944
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I printed with the top of the mount up so it would look nice and used tree supports. Printed at 250c nozzle, 81c bed in Esun Petg Lite/Basic Blue.
I added a mounting point to use the screw hole for the cable chain mounting point on the toolhead since I am not using the cable chain anymore. Makes for a super solid mount to the toolhead. I also changed the tail end of the mount to let the usb cable exit one squiggle earlier and remodeled the pass through for the ptfe tube as a result.