Qidi Plus 4 Dual Hub/Spool mount with 4 way input splitter mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses the Single mount for both the external spool and the Qbox hub, but with the spot to add the Bambu 4-1 splitter.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 788
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Qidi Plus4 has a single spot for the External Spool Holder. When you add the hub for the QBox, you lose the external mount. Many people have made an external double hub which lets you do both. I made a strong one, and added an arm that lets you install a Bambu 4 to 1 adaptor so you can feed the Qbox with 1 port, the external spool with another and have 2 more ports for whatever?? (TPU, filament from an external dryer, etc) - Whatever you choose. You have the options.
You will need a piece of PTFE tub 51mm long between the adaptor and the printer (best to install the tub into the adaptor, then the printer and finally mount on the arm. I used an M3x10mm Socket Cap screw to hold the Adaptor in place. I also added a 110mm piece of PTFE tube on the inlet for the external spool to ensure a natural angle. I have been running filament changes all day and no issues at all. Qidi users, to use the external spool, just turn off the box and the printer will expect manual loading from the spool.
Prionter with PLA but you can likely use anything. .2 layer height. Supports are set and does not print support in the screw hole mount. (link to my spool holder -
https://www.printables.com/model/1477082-qidi-plus-4-extended-angled-spool-holder-use-with
Demo here -